DIN Ski Binding — ISO 11088
DIN setting from skier type, weight, height, age, BSL. 0.75–16 range. ~30% of injuries from wrong DIN.
📋 Quick Examples — Click to Load
📊 DIN by Type
Your DIN vs typical ranges
📈 DIN vs Weight
Approximate Type II DIN by weight
🍩 DIN Infographic
Key facts
📊 Skier Type Comparison
Release vs retention by type
⚠️For educational and informational purposes only. Verify with a qualified professional.
🏅 Sports Records
DIN 0.75–16 range
~30% injuries from wrong DIN
BSL stamped on boot sole
DIN (Deutsches Institut für Normung) is the release force setting on ski bindings. ISO 11088 defines the chart-based lookup using skier type (1-3), weight, height, age, and boot sole length. Settings range from 0.75 to 16. Type III = aggressive expert skiers; incorrect DIN causes ~30% of ski injuries. Always have bindings adjusted by a certified technician.
Sources: ISO 11088, Marker bindings, Salomon.
Key Takeaways
- • DIN stands for Deutsches Institut für Normung; settings range 0.75-16.
- • Three skier types: Type I cautious, Type II intermediate, Type III aggressive.
- • ISO 11088 defines the international chart-based lookup standard.
- • Incorrect DIN is linked to ~30% of ski injuries—always use a certified technician.
Did You Know?
How Does the DIN Chart Work?
Chart Lookup
Find your weight in the first column, cross-reference boot sole length, then apply skier type and age adjustments. Type II adds ~0.5; Type III adds ~1.0; age 50+ adds ~0.5.
Skier Types
Type I: Cautious/beginner, easier release. Type II: Recreational. Type III: Aggressive expert, later release for high-speed skiing.
Safety
Never set DIN yourself without certification. A qualified technician will verify boot compatibility and perform a release test.
Expert Tips
Skier Type Comparison
| Type | Description | DIN Effect |
|---|---|---|
| Type I | Cautious / Beginner | Base |
| Type II | Intermediate | +0.5 |
| Type III | Aggressive / Expert | +1.0 |
Frequently Asked Questions
What does DIN stand for?
DIN stands for Deutsches Institut für Normung (German Institute for Standardization). The DIN setting on ski bindings controls release force. ISO 11088 defines the international standard for alpine ski binding adjustment. Settings range from 0.75 to 16.
How is DIN setting determined?
DIN is determined by a chart-based lookup using skier type (1-3), weight, height, age, and boot sole length. Type I = cautious/beginner, Type II = intermediate, Type III = aggressive. A certified technician should perform the final adjustment.
What are the three skier types?
Type I: Cautious—beginner, prefers easier release. Type II: Intermediate—recreational skier, moderate. Type III: Aggressive—expert, prefers later release for high-speed skiing. Incorrect DIN causes an estimated 30% of ski injuries.
What DIN range is typical?
DIN settings range from 0.75 (children/light adults) to 16 (heavy expert skiers). Most recreational adults use 4-10. Always have bindings adjusted by a certified technician—never set DIN yourself without proper training.
Why does boot sole length matter?
Boot sole length (BSL) affects leverage. Longer boots create more leverage on the binding, so the chart may recommend a slightly lower DIN for the same weight. BSL is stamped on the boot sole, typically 240-350mm.
Can wrong DIN cause injuries?
Yes. Incorrect DIN settings are linked to ~30% of ski injuries. Too low = premature release (falling). Too high = non-release (knee/leg injury). ISO 11088 and professional adjustment are essential for safety.
Key Statistics
Official Data Sources
⚠️ Disclaimer: This calculator provides an estimate only. All DIN settings must be adjusted and verified by a certified ski technician. Incorrect settings can cause serious injury or death. Not professional binding advice.