Raoult's Law: Ideal Solution Vapor Pressure
Raoult's Law states P = x·P°: the partial vapor pressure of a component equals its mole fraction times its pure vapor pressure. Ideal solutions (e.g., benzene-toluene) obey this; non-ideal solutions show positive or negative deviations. Foundation for distillation and colligative properties.
Why This Chemistry Calculation Matters
Why: Raoult's Law underpins vapor-liquid equilibrium, distillation design, and solution thermodynamics. Essential for chemical engineering separations and understanding colligative properties.
How: Enter mole fractions (summing to 1) and pure vapor pressures. For ideal solutions, P = x·P°. For non-ideal, use activity coefficients: P = γ·x·P°. Vapor composition follows Dalton's Law: y = P/Ptotal.
- ●Ideal solutions: benzene-toluene, hexane-heptane; similar molecules.
- ●Positive deviation (water-ethanol): weaker interactions than pure components.
- ●Negative deviation (chloroform-acetone): stronger interactions (e.g., H-bonding).
Solution Examples
💧 Water-Ethanol Ideal Solution
Equal mole fractions - ideal behavior
🧪 Benzene-Toluene Mixture
Classic ideal solution example
📈 Water-Ethanol Positive Deviation
Non-ideal solution with positive deviation
📉 Chloroform-Acetone Negative Deviation
Non-ideal solution with negative deviation
🌊 Pure Water
Single component - pure water vapor pressure
🍺 Methanol-Water Mixture
Alcohol-water binary system
⛽ Hexane-Heptane Ideal
Alkane mixture - nearly ideal
💨 Calculate Vapor Composition
Find vapor mole fractions using Dalton's Law
Calculate Vapor Pressure
For educational and informational purposes only. Verify with a qualified professional.
🔬 Chemistry Facts
Raoult's Law: Pi = xi × P°i for ideal solutions.
— IUPAC
Non-ideal: Pi = γi × xi × P°i; γ > 1 positive, γ < 1 negative deviation.
— IUPAC
Vapor enriched in more volatile component (higher P°).
— NIST
Benzene-toluene is classic ideal solution; water-ethanol shows positive deviation.
— NIST
What is Raoult's Law?
Raoult's Law describes the vapor pressure of ideal solutions. It states that the partial vapor pressure of each component in a solution is equal to the vapor pressure of the pure component multiplied by its mole fraction in the solution.
Pᵢ = partial vapor pressure, P°ᵢ = pure component vapor pressure, xᵢ = mole fraction
How Does Raoult's Law Work?
Raoult's Law is based on the principle that in an ideal solution, the escaping tendency of molecules is proportional to their concentration. Pᵢ = P°ᵢ × xᵢ; P_total = P₁ + P₂.
When to Use Raoult's Law
Use for vapor-liquid equilibrium, distillation design, chemical engineering separation processes, and solution thermodynamics. Essential for binary mixtures and phase behavior.
Types and Key Concepts
Ideal solutions (benzene-toluene, hexane-heptane). Non-ideal: positive deviation (water-ethanol) or negative deviation (chloroform-acetone). Activity coefficients: Pᵢ = γᵢ × P°ᵢ × xᵢ.
Key Formulas
| Raoult's Law | Pᵢ = P°ᵢ × xᵢ |
| Non-Ideal | Pᵢ = γᵢ × P°ᵢ × xᵢ |
| Total Pressure | P_total = P₁ + P₂ |
| Vapor Composition | yᵢ = Pᵢ / P_total |
Practical Examples and Reference Data
| Component | Formula | P° (25°C, mmHg) | Boiling Point (°C) | Category |
|---|---|---|---|---|
| Water | H_{2}O | 23.8 | 100 | Common |
| Ethanol | C_{2}H₅ ext{OH} | 59 | 78.4 | Alcohols |
| Methanol | CH_{3} ext{OH} | 127 | 64.7 | Alcohols |
| Benzene | C₆H₆ | 95.1 | 80.1 | Aromatics |
| Toluene | C₇H₈ | 28.4 | 110.6 | Aromatics |
| Acetone | C_{3}H₆O | 230 | 56.1 | Ketones |
| Chloroform | CHCl_{3} | 199 | 61.2 | Halocarbons |
| Carbon Tetrachloride | ext{CCl}₄ | 114 | 76.7 | Halocarbons |
| Diethyl Ether | C₄H_{1}_{0}O | 537 | 34.6 | Ethers |
| Hexane | C₆H_{1}₄ | 151 | 68.7 | Alkanes |
| Heptane | C₇H_{1}₆ | 45.8 | 98.4 | Alkanes |
| Octane | C₈H_{1}₈ | 14.1 | 125.7 | Alkanes |
| Acetic Acid | CH_{3} ext{COOH} | 15.7 | 118.1 | Acids |
| Formic Acid | ext{HCOOH} | 42 | 100.8 | Acids |
| Pyridine | C₅H₅N | 20 | 115.2 | Heterocycles |
| Cyclohexane | C₆H_{1}_{2} | 97.6 | 80.7 | Cycloalkanes |
| Tetrahydrofuran | C₄H₈O | 145 | 66 | Ethers |
| Dichloromethane | CH_{2}Cl_{2} | 435 | 39.8 | Halocarbons |
| Ethyl Acetate | C₄H₈O_{2} | 95 | 77.1 | Esters |
| Isopropanol | C_{3}H₇ ext{OH} | 44 | 82.6 | Alcohols |
Practical Examples
Example: Benzene-Toluene Ideal Solution
Given:
- Benzene: P° = 95.1 mmHg, x = 0.6
- Toluene: P° = 28.4 mmHg, x = 0.4
- Temperature: 25°C
Solution:
P_benzene = 95.1 × 0.6 = 57.1 mmHg
P_toluene = 28.4 × 0.4 = 11.4 mmHg
P_total = 57.1 + 11.4 = 68.5 mmHg
y_benzene = 57.1/68.5 = 0.833
Example: Water-Ethanol Positive Deviation
Given:
- Water: P° = 23.8 mmHg, x = 0.5
- Ethanol: P° = 59.0 mmHg, x = 0.5
- γ_water = 1.2, γ_ethanol = 1.3
Solution:
P_water = 1.2 × 23.8 × 0.5 = 14.3 mmHg
P_ethanol = 1.3 × 59.0 × 0.5 = 38.4 mmHg
P_total = 52.7 mmHg
Higher than ideal (41.4 mmHg)
Limitations of Raoult's Law
- Does not apply to solutions with very different molecular sizes, strong H-bonding, electrolytes, or high pressure
- Assumes chemically similar components, random mixing, and constant temperature
📚 Official Data Sources
⚠️ Disclaimer: This calculator uses IUPAC definitions for Raoult's law and solution thermodynamics. Vapor pressure data is approximate; for precise work consult IUPAC Gold Book, NIST Chemistry WebBook, and Atkins Physical Chemistry.
Related Calculators
Activity Coefficient Calculator
Calculate activity coefficients using Debye-Hückel, Extended Debye-Hückel, Davies, and Pitzer equations. Understand how ionic strength affects activity in...
ChemistryAlligation Calculator
Calculate final concentrations and mixing proportions using alligation medial and alternate methods. Perfect for pharmacy compounding, IV solutions, and...
ChemistryBleach Dilution Calculator
Calculate bleach dilution ratios using C1V1 = C2V2 formula. Convert between percentage, ppm, and mg/L concentrations. Includes CDC/WHO guidelines for...
ChemistryBuffer Capacity Calculator
Calculate buffer capacity using standard formula, Van Slyke equation, and intrinsic water capacity. Compare buffer systems and find optimal concentrations.
ChemistryBuffer pH Calculator
Calculate buffer pH using Henderson-Hasselbalch equation. Predict pH changes when acid/base is added, support polyprotic buffers (phosphate, citrate), and...
ChemistryConcentration Calculator
Convert between all concentration units (M, mM, μM, nM, %, ppm, ppb, g/L, mg/mL) and calculate mass/volume needed for target concentrations. Includes...
Chemistry